How To Use A Stud Locator Properly In Order To Get The Most Accurate Results

Stud locators come in a variety of sizes, with different features and price tags, but all of them are designed for a specific purpose, to locate a stud behind a wall. Yes, they are easy to use, but still, many people make mistakes which have a huge side effect on the accuracy and later of further tasks. Most websites, such as www.studlocator.com offer the basic information, but not how to use a stud locator. Here, you will get a complete guide for proper usage.

Preparation:

  1. Make sure the battery is fully charged. This applies only for electronic stud locators, but it is extremely important. If the battery is drained out, the results may be not accurate! Always make sure that the battery is at 100%.
  2. Clean both surfaces. In order to get accurate results, both surfaces must be cleaned. We say both because the wall is the first and the side of the stud detector that goes on the wall is the second There is no point in telling you that all, paintings, accessories and other items must be removed from the wall.
  3. Place the stud locator completely on the wall, not just a small part. This is actually the biggest mistake, beginners make. If you make it, the data won’t be accurate at all.
  4. Calibrate the stud locator. Hold the buttons until you hear the first beep or an LED notification. It means that the device is calibrated for finding that specific material.

Begin using the tool:

  1. Place the stud locator on the wall, on the left side of the area you want to ‘’explore’’.
  2. Move it slowly and monitor for results.
  3. Verify the results. Make sure studs are spaced 16 or 24 inches from each other. If you detect something that is too close, it may be plumbing or etc. Top tip: Use the first 16 or 24-inch area as a reference for other studs.
  4. Mark the detections with a pen.
  5. Always double-check each wall, just to make sure the results are accurate.

Additionally, you will have to know that a stud locator must be dragged horizontally, not vertically! Make sure you move it slowly, just to increase the accuracy rate. Removing dirt or other substance from a wall is highly recommended as well. If you follow all of these tips and guidelines, you will detect studs without a single error.